CMOS-MEA5000+MEA2100-256-System

Bundle of CMOS-MEA5000 and MEA2100-256-System.
CMOS-MEA workstation for recording and analyzing data from active CMOS-MEAs. With integrated data acquisition for recording from 4225 MEA electrodes and 8 additional analog channels. Integrated filter amplifier and 3-channel voltage stimulus generator for stimulating 1024 stimulation sites on the CMOS chip.
MEA2100 workstation for recording and analyzing data from 256-electrode MEAs (microelectrode array). With integrated data acquisition for recording from 256 MEA electrodes and 8 additional analog channels. Integrated filter amplifier and 3-channel current or voltage stimulus generator.
Complete with interface board, CMOS-MEA-headstage, MEA2100-256 headstage, data acquisition computer with preinstalled software, perfusion kit, and accessories. USB High Speed data transfer with a sampling rate of up to 50 kHz/channel (25 kHz/channel for CMOS).

 

• CMOS-MEA5000 headstage:
  Pre- and filter amplifier with integrated data acquisition,
  stimulus generator, and analog-digital converter
  - Bandwidth adjustable via software
  - Data resolution: 14 bit
  - Direct access to each stimulation site for stimulation
    via internal stimulus generator.
  - Control of stimulator via the included data acquisition
    software CMOS-MEA-Control
  - Integrated blanking circuit for stimulus artifact suppression
  - 3 independent stimulus generators
  - Voltage stimulation at max. +/-2 V
  - Sampling rate max. 25 kHz per channel
• MEA2100 headstage (MEA2100-HS256):
  Pre- and filter amplifier with integrated data acquisition and
  analog-digital converter
  - Bandwidth adjustable via software
  - Data resolution: 24 bit
  - Direct access to each electrode for stimulation via internal stimulus generator
  - Control of stimulator via the included data acquisition software
  - Integrated blanking circuit for stimulus artifact suppression
  - 2 independent stimulus generators
  - Current stimulation at max. +/-1.5 mA
  - Voltage stimulation at max. +/-10 V
  - Sampling rate max. 50 kHz per channel
  - Integrated heating element (PT 100 sensor)
  - With installed metal plate for fixing of perfusion equipment
• Interface board multiboot (IFB-C):
  Interface board with signal processor for real-time signal
  detection and feedback
  Includes various in-/outputs:
  - 16 possible boot images to operate all MCS headstages
of the modular 2100 amplifier suite
  - 16-bit digital input/output channels for TTL integration, 3.3/5 V compatible
(All channels accessible on the backside via Honda-PCS-XE68LFD,
additional bit 0-3 digital in and bit 0-3 digital out accessible on
the front via LEMO EPL.00.250.NTN)
  - Channel definition via software: IFB-Control
(free to download) – Boot image definition
  - 8 analog input channels, +/- 10 V voltage input range
@ 24 bit ADC accessible on the front
(All channels via DIL10Header-100mil, channel 1 and 2
additional via LEMO EPL.00.250.NTN)
  - Audio/stereo out (standard stereo jack 3.5 mm)
  - USB-3.0 type C data transfer to PC (cable included)
  - iX industrial, type B cable for connecting IFB-C to
headstage/signal collector unit/receiver (cable included)
  - DSP-JTAG for direct programming of the built-in DSP
(DIL14Header-100mil-angeled)
  - Physical ground socket (4 mm socket)
  - External power supply included: 24 V/65 W, 110-240 V
• CMOS-MEA-Control program and Multi Channel Suite programs:
  - Data acquisition and analysis softwares
  - Including a 2 years maintenance package (software updates
    and support)
• Data acquisition computer:
  - PC with 2 monitors, keyboard and mouse
  - With preinstalled hardware operating system and software
Perfusion kit:
• TC02:
  2-channel temperature controller for biological samples
  - Set-point temperature reached fast within 30 seconds to 5 minutes
  - Control temperature range from ambient temperature to +50 °C
  - Precision controller using PI characteristics
  - 100-240 V input voltage range, external power supply
• TCX_Control Program:
  TCX-Control is a software to control the MCS temperature controllers. Through
  the quick USB interface, it is possible to adjust all settings of the TC01/02
  temperature controller online.
• 1 x PH01:
  - Heatable perfusion cannula with temperature sensor
  - Controlled by TC01/02
• 1 x PPS2:
  - Peristaltic perfusion system with one inlet and one drain pump
  - Controlled by software or touch pad
  - Flow rate: 0 - 30 ml/min
• Perfusion Accessories:
  - 2 magnetic perfusion holders
  - Replacement set of fluidic devices (PPS2-Set-F)
• Accessories:
  - Signal generator
  - Spare parts
  - CMOS dark chamber
  - CMOS tissue holder
  - USB memory stick with user manuals and software

Technical specifications as specified in the data sheet unless noted otherwise in the order.