Multiwell+MEA2100-Mini-60-System

Manufacturer: 
Multi Channel Systems MCS GmbH
Quality Made in Germany

Bundle of Multiwell and MEA2100-Mini-60-System.
Multiwell-MEA workstation for recording and analyzing data from multiwell MEA plates. With integrated data acquisition for recording from 288 MEA electrodes and 8 additional analog channels. Integrated filter amplifier and voltage stimulus generator (simultaneous stimulation in all wells possible. Any electrode can be selected for stimulation).
MEA workstation with small footprint for recording and analyzing data from one 60-electrode MEA (microelectrode array). With integrated data acquisition for recording from 60 MEA electrodes and 8 additional analog channels. Integrated filter amplifier and 2-channel current or voltage stimulus generator. Headstage can be operated in a humid incubator.
Complete with interface board, Multiwell-MEA headstage, MEA2100-Mini-headstage, signal collector unit (SCU), data acquisition computer with preinstalled software, perfusion kit, and accessories.

USB High Speed data transfer with a sampling rate of up to 50 kHz/channel.

• Multiwell-MEA headstage:
  - Pre- and filter amplifier with integrated data acquisition and
    analog-digital converter
  - Bandwidth adjustable via software
  - Data resolution 24 bit
  - Direct access to each electrode for stimulation via internal
    stimulus generator.
  - Control of stimulator via the included data acquisition
    software Multiwell Screen
  - Integrated blanking circuit for stimulus artifact suppression
  - Integrated stimulus generators (any electrode can be selected
    for stimulation)
  - Current stimulation at max. +/-1 mA
  - Voltage stimulation at max. +/-10 V
  - Sampling rate max. 50 kHz per channel
  - Integrated heating plate and temperature control
• MEA2100-Mini headstage (MEA2100-Mini-HS60):
  Pre- and filter amplifier with integrated data acquisition and
  analog-digital converter. Can be operated in a humid incubator.
  - Dimensions: 186 mm x 80 mm x 12 mm
  - Bandwidth adjustable via software
  - Direct access to each electrode for stimulation via internal stimulus generator
  - Control of stimulator via the included data acquisition software
  - Integrated blanking circuit for stimulus artifact suppression
  - 2 independent stimulus generators
  - Current stimulation at max. +/-1 mA
  - Voltage stimulation at max. +/-10 V
  - Power consumption 1.5 W
  - Sampling rate max. 50 kHz per channel
  - Integrated heating element with PT 100 sensor
• MCS signal collector unit (MCS-SCU in vitro):
  - Four programmable outputs for optical stimulation (optogenetics)
  - Up to four MEA2100-Mini headstages can be operated with one MCS-SCU
  - Up to two signal collector units can be connected to one IFB
• Interface board multiboot (IFB-C):
  Interface board with signal processor for real-time signal
  detection and feedback
  Includes various in-/outputs:
  - 16 possible boot images to operate all MCS headstages
of the modular 2100 amplifier suite
  - 16-bit digital input/output channels for TTL integration, 3.3/5 V compatible
(All channels accessible on the backside via Honda-PCS-XE68LFD,
additional bit 0-3 digital in and bit 0-3 digital out accessible on
the front via LEMO EPL.00.250.NTN)
  - Channel definition via software: IFB-Control
(free to download) – Boot image definition
  - 8 analog input channels, +/- 10 V voltage input range
@ 24 bit ADC accessible on the front
(All channels via DIL10Header-100mil, channel 1 and 2
additional via LEMO EPL.00.250.NTN)
  - Audio/stereo out (standard stereo jack 3.5 mm)
  - USB-3.0 type C data transfer to PC (cable included)
  - iX industrial, type B cable for connecting IFB-C to
headstage/signal collector unit/receiver (cable included)
  - DSP-JTAG for direct programming of the built-in DSP
(DIL14Header-100mil-angeled)
  - Physical ground socket (4 mm socket)
  - External power supply included: 24 V/65 W, 110-240 V
• Multiwell Screen and Multi Channel Suite programs:
  - Data acquisition and analysis softwares
  - Including a 2 years maintenance package (software updates
    and support)
• Data acquisition computer:
  - PC with 2 monitors, keyboard and mouse
  - With preinstalled hardware operating system and software
Perfusion kit:
• TC02:
  2-channel temperature controller for biological samples
  - Set-point temperature reached fast within 30 seconds to 5 minutes
  - Control temperature range from ambient temperature to +50 °C
  - Precision controller using PI characteristics
  - 100-240 V input voltage range, external power supply
• TCX_Control Program:
  TCX-Control is a software to control the MCS temperature controllers. Through
  the quick USB interface, it is possible to adjust all settings of the TC01/02
  temperature controller online.
• 1 x PH01:
  - Heatable perfusion cannula with temperature sensor
  - Controlled by TC01/02
• 1 x PPS2:
  - Peristaltic perfusion system with one inlet and one drain pump
  - Controlled by software or touch pad
  - Flow rate: 0 - 30 ml/min
• Perfusion Accessories:
  - 2 magnetic perfusion holders
  - Replacement set of fluidic devices (PPS2-Set-F)
• Accessories:
  - Signal generator
  - Spare parts
  - USB memory stick with user manuals and software

Technical specifications as specified in the data sheet unless noted otherwise in the order.

References

Documents
Accessories

Headstage to record data from one 60-electrode MEA with small footprint and operatable in a humid incubator.

Headstage to record data from one 120-electrode MEA with small footprint and operatable in a humid incubator.

Perfusion kit for MEA-Systems including TC02, PH01, PPS2, and 2 MPH.

Interface board with signal processor for real-time signal detection and feedback. Receives data from MEA2100-Headstages, Multiwell-MEA-Headstage, CMOS-MEA5000-Headstage, ME2100-Systems or W2100-Systems.

Interface board with signal processor for real-time signal detection and feedback. Receives data from MEA2100-Headstages, Multiwell-MEA-Headstage, CMOS-MEA5000-Headstage, ME2100-Systems or W2100-Systems.

MCS signal collector unit for MEA2100-Mini-System or MEA2100-Beta-Screen-System.

Peristaltic perfusion system PPS2 with 2 independent pumps.

Heatable perfusion cannula with temperature sensor; temperature can be programmed with the temperature controller TC01 or TC02.

CVP

Constant Vacuum Pump with pressure control.

MPH

Magnetic perfusion holder for perfusion cannula.

Temperature Controller, 2 channels.

Pages

MEAs

Three dimensional Microelectrode array:

TiN electrodes, SiN isolator, contact pads and tracks opaque (TiN), with internal reference electrode, electrode grid 8x8, 60 electrodes, electrode spacing 100 µm, electrode diameter 12 µm, electrode height in total 40 µm, warranty: 6 months.

Please note: Due to the delicate etching process involved in 3D electrode production, 60-3DMEAs with one high impedance electrode are still considered top quality.

Read more about our 3D MEAs in this flyer.


Three dimensional Microelectrode array:

TiN electrodes, SiN isolator, contact pads and tracks opaque (TiN), with internal reference electrode, electrode grid 8x8, 60 electrodes, electrode spacing 200 µm, electrode diameter 12 µm, electrode height in total 50 µm, warranty: 6 months.

Please note: Due to the delicate etching process involved in 3D electrode production, 60-3DMEAs with one high impedance electrode are still considered top quality.

Read more about our 3D MEAs in this flyer.


Standard microelectrode array:

TiN electrodes, SiN isolator, contact pads and tracks transparent (ITO), with 1 internal reference electrode, electrode grid 8x8, 59 recording electrodes, electrode spacing 100µm, electrode diameter 10µm, warranty: 6 months.


Standard Microelectrode array:

TiN electrodes, SiN isolator, contact pads and tracks opaque (TiN), with 1 internal reference electrode, electrode grid 8x8, 60 electrodes, electrode spacing 100, electrode diameter 10, warranty: 6 months.


Microelectrode array with thin recording field:
180 µm thin recording area, TiN electrodes, SiN isolator, ITO conductive strips, with 1 internal reference electrode, electrode grid 8x8, 59 recording electrodes, electrode spacing 100 µm, electrode diameter 10 µm, warranty: 6 months.


Standard Microelectrode array:

TiN electrodes, SiN isolator, contact pads and tracks transparent (ITO), with internal reference electrode, electrode grid 8x8, 60 electrodes, electrode spacing 200µm, electrode diameter 10µm, warranty: 6 months.


Standard Microelectrode array:

TiN electrodes, SiN isolator, contact pads and tracks opaque (TiN), with internal reference electrode, electrode grid 8x8, 60 electrodes, electrode spacing 200µm, electrode diameter 10µm, warranty: 6 months.


Standard Microelectrode array:

TiN electrodes, SiN isolator, contact pads and tracks transparent (ITO), with internal reference electrode, electrode grid 8x8, 60 electrodes, electrode spacing 200µm, electrode diameter 30µm, warranty: 6 months.


Standard Microelectrode array:

TiN electrodes, SiN isolator, contact pads and tracks opaque (TiN), with internal reference electrode, electrode grid 8x8, 60 electrodes, electrode spacing 200µm, electrode diameter 30µm, warranty: 6 months.


Microelectrode array with thin recording field:

180µm thin recording area, TiN electrodes, SiN isolator, ITO conductive strips, with internal reference electrode, electrode grid 8x8, 60 electrodes, electrode spacing 200µm, electrode diameter 30µm, warranty: 6 months.


Microelectrode array, perforated layout:

TiN electrodes, Polyimid isolator, contact pads and tracks opaque (TiN on glass carrier), with internal reference electrode, electrode grid 8x8, 60 electrodes, electrode spacing 200µm, electrode diameter 30µm, warranty: 6 months.


Low priced microelectrode array:

Gold electrodes and tracks, with internal reference electrode, electrode grid 8x8, 60 electrodes, electrode spacing 700µm, electrode diameter 100µm, warranty: 6 months.


Standard microelectrode array:
TiN electrodes (square), SiN isolator, Contact pads and tracks opaque (TiN), With 1 internal reference electrode, Electrode grid 8x8, 59 recording electrodes, Electrode spacing 200 µm, Electrode size 50 µm x 50 µm, Warranty: 6 months.


PEDOT-CNT microelectrode array:
PEDOT-CNT electrodes, SiN isolator, Contact pads and tracks opaque (Ti-Au), with 1 internal reference electrode, electrode grid 8x8, recording electrodes, electrode spacing 200 µm, electrode diameter 30 µm,  warranty: 6 months.

These electrodes feature some superior properties:

  • Ideally suited for stimulation
  • Excellent biocompatibility and cell adhesion
  • Reproducible low impedance

Please find more information on PEDOT-CNT microelectrode arrays in the flyer.


Standard Microelectrode array:

TiN electrodes, SiN isolator, contact pads and tracks opaque (TiN), with internal reference electrode, electrode grid 6x10, 60 electrodes, electrode spacing 500µm, electrode diameter 10µm, warranty: 6 months.


Standard Microelectrode array:

TiN electrodes, SiN isolator, contact pads and tracks opaque (TiN), with internal reference electrode, electrode grid 6x10, 60 electrodes, electrode spacing 500µm, electrode diameter 30µm, warranty: 6 months.


Microelectrode array, perforated layout:

TiN electrodes, Polyimid isolator, contact pads and tracks opaque (TiN on glass carrier), with internal reference electrode, electrode grid 6x10, 60 electrodes, electrode spacing 100µm, electrode diameter 30µm, warranty: 6 months.


High dense Microelectrode array:

Double recording field (500µm in-between fields), TiN electrodes, SiN isolator, contact pads and tracks transparent (ITO), with internal reference electrode, electrode grid 2x(5x6), 60 electrodes, electrode spacing 30µm, electrode diameter 10µm, warranty: 6 months.


Microelectrode array with thin recording field:

180µm thin recording area, TiN electrodes, SiN isolator, ITO conductive strips, with internal reference electrode, electrode grid 2x(5x6), 60 electrodes, electrode spacing 30, electrode diameter 10, warranty: 6 months.


Microelectrode array, hexagonal layout:

TiN electrodes, SiN isolator, contact pads and tracks transparent (ITO), electrode grid hexagonal, 60 electrodes, electrode spacing (30, 60, 90µm), electrode diameter (10, 20, 30µm), warranty: 6 months.


Microelectrode array, hexagonal layout:

TiN electrodes, SiN isolator, contact pads and tracks transparent (ITO), with internal reference electrode, electrode grid hexagonal, 60 electrodes, electrode spacing 40µm, electrode diameter 10µm, warranty: 6 months.


Microelectrode array with 6 recording areas, circular layout:

Tin electrodes, SiN isolator, contact pads and tracks opaque (TiN), with internal reference electrode in each area, electrode grid 3x3 in each area, 54 electrodes, electrode spacing 200µm, electrode diameter 30µm, warranty: 6 months.


4 quadrants microelectrode array:

TiN electrodes, SiN isolator, contact pads and tracks opaque (TiN), with internal reference electrode, electrode grid 4x (1x4 + 1x5 + 1x4) + center line 1x7, 60 electrodes, electrode spacing 200µm inside the quadrants; 1000µm between the quadrants, electrode diameter 30µm, warranty: 6 months.


Multiwell MEA Plates

Multiwell plates for the Multiwell-MEA-System:

24 or 96 wells, 288 recording electrodes, 12 or 3 electrodes with reference per well, FR4 or transparent glass substrate, Sterilized by gamma radiation. Not for medical use.